Back to top
Send SMS Send Inquiry
+918068095943
    Home » Products » Headspace Gas Analyzer » Process O2 Analyzer

    Process O2 Analyzer

    Process O2 Analyzer
    Process O2 Analyzer
    Send Inquiry
    Product Code : POA
    Product Description

    Process O2 Analyzer

    The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms.

    This process o2 analyzer is available with any single range from 0 to 5% up to 0 to 100% O2 vol/vol full scale.
    For those applications where a source of sample flow is not available, the 905P can be equipped with an optional sample pump which can operate in a continuous or batch (1-10 seconds) mode.


    About The O2 Sensor:

    The Model 905P design incorporates a long-life, heavy duty, proprietary electrochemical, maintenance free sensor. The sensor is totally sealed, operates at room temperature and is internally compensated for slight temperature variations. Unlike other sensors, it is not dependent on a controlled flow rate for accuracy, is not heated and is not affected by high levels of CO2, hydrocarbon or other gases.

    The sensor assembly is cable connected to the control circuit board. It can be used with diffusion or pumped sample draw systems. The measurement accuracy is not affected by sample flow rate.

    The expected electrochemical sensor life is typically 5 years, unlike other analyzers with an electrochemical sensor that last 1-2 years.


    Optional Internal Battery:

    With its low power requirement, the Model 905P can be operated with an optional battery for those applications where AC power is not readily available. A totally sealed, long-life internal 12 Vdc gel battery accepts a full or partial charging cycle and will operate the unit for up to 8 hours

     

    Specification:

    • Range: 0.0 to 100% Oxygen
    • Resolution: 0.1% Oxygen (optional .01% resolution available)
    • Accuracy: +/- 1% of reading
    • Minimum Detection Limit: 0.1%
    • Drift: Less than 1% per month
    • Sensor: Proprietary electrochemical cell
    • Sensor Lifetime: Expected lifetime 4-5 years
    • (Optional) Pump: Internal, with adjustable timer (2-12 seconds), draws ~5cc/sec
    • Calibration: Calibrates with room air; span and zero adjusters on back of analyzer, NIST certificate included
    • Calibration Frequency: Two years after initial shipment, recommended once a year thereafter
    • Power Supply: 100-240V Internationally compatible power supply/charger
    • Input Voltage: 100-240V, 50-60Hz
    • (Optional) Battery: 10-14 hour run time before recharging
    • Size: 9.8in x 4in x 10in. (249 x 102 x 254 mm)
    • Weight: 8 lb. (3.6 Kg)
    • Warranty: 2 years, parts and labor
    • Standards: CE, RoHS
    • Options: Internal pump, cycling-enabled pump, 0-5Vdc analog output, internal relay/control board to activate external audible alarm, buzzer, or contact closure.
    • Included Documentation: Owners manual (includes operating instructions with detailed calibration instructions, calibration certficate, precautions), NIST calibration certificate
    • Origin of Goods: Our products are manufactured in the U.S.A.

     

     


    Additional Information:
    • Item Code: 905P
    Trade Information
    • Main Domestic Market
    • All India

    PARISA TECHNOLOGY
    X